点击图片查看原图
The failure of Zhenjiang SKF bearing is often caused by many factors. All the factors affecting the design and manufacturing process will be related to the bearing failure. It is not easy to judge from the analysis. Generally speaking, it can be considered and analyzed from two aspects: the use factor and the internal factor.
使用因素主要指安装调整、使用、维护、保养和维修。安装条件是镇江SKF轴承使用中重要的因素之一，往往由于轴承安装不当，导致整个轴承之间的机械状态发生变化。轴承和轴承的异常操作和早期失效。根据轴承安装、使用、维护和维护的技术要求，对轴承在运行中的载荷、速度、工作温度、振动、噪声、润滑状态等进行监测和检查，及时发现异常原因。D并将其调整为正常。此外，分析润滑脂的质量和周围介质和气氛也是重要的。
The use factor mainly refers to installation adjustment, use, maintenance, maintenance and repair. Installation condition is one of the important factors in the use of Zhenjiang SKF bearings. Often the improper installation of bearings leads to the change of mechanical state between bearings. Abnormal operation and early failure of bearings and bearings. According to the technical requirements of bearing installation, use, maintenance and maintenance, the load, speed, working temperature, vibration, noise, lubrication status of the bearing in operation are monitored and inspected, and the abnormal reasons are found in time. D and adjust it to normal. In addition, it is also important to analyze the quality of grease and the surrounding medium and atmosphere.
对于企业来说，避免轴承的危害是非常简单的。在使用镇江SKF轴承时，企业须配置业内人员进行整体轴承测试。在轴承运行数据不稳定的情况下，可以及时发现各种故障，以达到早期预防的目的。对于企业来说，提前掌握轴承预防技术，降低轴承使用成本，将轴承使用成本降低一半以上是非常重要的。
For enterprises, avoiding the harm of bearings is very simple. In the use of Zhenjiang SKF bearings, enterprises must configure the industry to carry out the overall bearing test. In the case of unstable bearing operation data, various faults can be found in time to achieve the purpose of early prevention. For enterprises, it is very important to master the bearing prevention technology in advance, reduce the cost of bearing use, reduce the cost of bearing use by more than half.
只要镇江SKF轴承失效，基础数据不可避免地会产生更大范围的变化。在使用轴承一段时间后，如果数据间隙大，轴承的特定尺寸和内部间隙测量表明轴承可能失效。在这一点上，我们需要使用固有仪器来检测轴承，处理故障和发芽。
As long as the SKF bearing in Zhenjiang fails, the basic data will inevitably produce a wider range of changes. After using the bearing for a period of time, if the data gap is large, bearing specific dimensions and internal clearance measurements indicate that the bearing may fail. At this point, we need to use inherent instruments to detect bearings, handle faults and sprout.
许多轴承故障是突发性的，难以及时检测和检测。此时，企业需要利用运行前后的数据进行轴承统计，发现异常数据，及时完成细致的测试，只有努力工作，企业才能远离各种故障的威胁，保持轴承稳定运行。
文章来自：镇江SKF轴承 www.wh-skf.com
The article is from: Zhenjiang SKF bearing www.wh-skf.com
文章来自：镇江INA轴承 www.ina-china.cn
The article is from: Zhenjiang INA bearing www.ina-china.cn
文章来自：镇江NSK轴承 www.klbbearings.com
The article is from: Zhenjiang NSK bearing www.klbbearings.com
QQ：524085168
电话：0510-81207777
手机：13311666672
