After installation of imported SKF bearings in Taizhou, certain cleaning and maintenance should be carried out. The so-called cleanliness test is a test method for separating impurities from rolling bearings and measuring their contamination. At present, there are three kinds of cleanliness detection methods: quality inspection, microscopic counting test and automatic particle counting test.
1。自动颗粒计数试验。
1. Automatic particle counting test.
2。显微镜检查。
2. Microscopic examination.
这种方法与质量方法相似。用显微镜直接观察滤膜中杂质颗粒的大小和数量。不同之处在于,清洗液的化学成分和杂质含量可以在过滤后测定。该方法**适用于轴承精*密泰州SKF轴承的清洁度测量。它也可以基于杂质的形状。
This method is similar to the quality method. The size and quantity of impurity particles in the filter membrane were observed directly with a microscope. The difference is that the chemical composition and impurity content of the cleaning solution can be determined after filtration. This method ** is suitable for measuring the cleanliness of SKF bearings in Mitai. It can also be based on the shape of impurities.
三。质量方法试验。
Three. Quality method test.
进口轴承按J*B/T50-2005相关国家标准进行过滤、干燥、称重。首先,将滚动轴承中的杂质清洗到清洗液中,计算杂质的质量。
轴承烧*伤的塑性变形
Plastic Deformation of Bearing Burns
泰州SKF轴承烧*伤的主要原因是滚动轴承的润滑不*良,这可能是由于使用不规则的润滑剂,或润滑剂过多或不足,这是不正确的。所谓轴承烧坏状态是指:滚道轮、滚动体及轴承保持架在旋转过程中急剧加热直至变色、软*化、沉积和损坏。
Taizhou SKF bearing burns are mainly due to poor lubrication of rolling bearings, which may be due to the use of irregular lubricants, or excessive or insufficient lubricants, which is incorrect. The so-called bearing burnout state refers to: raceway wheel, rolling element and bearing cage are heated sharply in the process of rotation until discoloration, softening, deposition and damage.
研究要协调,轴承间隙和预紧,密封装置要改进。检查轴和轴承箱的精度。听着,我想每个人都想知道答案。首先,选择合适的滚动泰州SKF轴承润滑剂及其用量,研究润滑剂和润滑方法,选择合适的轴承。
Research should be coordinated, bearing clearance and pre-tightening, sealing device should be improved. Check the accuracy of shaft and bearing box. Listen, I think everyone wants to know the answer. Firstly, choose the appropriate lubricant and its dosage for rolling Taizhou SKF bearing, study the lubricant and lubrication method, and select the appropriate bearing.
通常,深沟球轴承的温度随着轴承工作的开始而缓慢上升,并在1-2小时后达到稳定状态。轴承的正常温度随热容、散热、速度和机械负荷而变化。如果润滑和安装部件合适,轴承温度将急剧上升,进口轴承将产生异常高温。此时,我们必*须停止工作,采取必要的预防措施。
文章来自:泰州SKF轴承 www.wh-skf.com
Article from: Taizhou SKF Bearing www.wh-skf.com
文章来自:泰州INA轴承 www.ina-china.cn
Article from: Taizhou INA Bearing www.ina-China.cn
文章来自:泰州NSK轴承 www.klbbearings.com
Article from: Taizhou NSK Bearing www.klbbearings.com
QQ:524085168
电话:0510-81207777
手机:13311666672/13395185757